Optical D Slave Cable L Type II for Z-240/D-2000/D-180/Z-220 series
Shopping Cart:
Items: 0 | £0.00
View Cart
Home > OPTICAL CABLE SETS, CABLES AND ACCESSORIES
Optical D Slave Cable L Type II (for Z-240/D-2000/D-180/Z-220) series
Click Image to enlarge

Optical D Slave Cable L Type II (for Z-240/D-2000/D-180/Z-220) series

£110.99
■Master Strobe (Main Strobe)
INON Z-240, D-2000, D-2000S, D-2000W/Wn,
D-180, D-180S, Z-220, Z-220F, Z-220S

■Slave Strobe (Sub strobe)
INON S-2000, Z-240, D-2000, D-2000S, D-2000W/Wn,
D-180, D-180S, Z-220F, Z-220S, Z-22(*2)

(*1) This product is also attached on following diffusers for compatible master strobes and supplied "-0.5 Diffuser" / "-1.5 Diffuser" included in「Z-240」. The Z-240 shipped after July 2009 comes with -0.5 White Diffuser 2 only. Following compatible "diffusers" are available as optional accessory;

sold separately option
[-0.5 White Diffuser (External Auto)], [-0.5 White Diffuser 2 (External Auto)]
[-0.5 Blue Diffuser (External Auto)], 「-0.5 Blue Diffuser 2 (External Auto)]
[-1.5 White Diffuser (External Auto)], 「-1.5 White Diffuser 2 (External Auto)]
[-1.5 Blue Diffuser (External Auto)], 「-1.5 Blue Diffuser 2 (External Auto)]
[-0.5 White Diffuser (TTL / Manual)], 「-0.5 White Diffuser 2 (TTL / Manual)]
[-0.5 Blue Diffuser (TTL / Manual)], 「-0.5 Blue Diffuser 2 (TTL / Manual)]
[-1.5 White Diffuser (TTL / Manual)], 「-1.5 White Diffuser 2 (TTL / Manual)]
[-1.5 Blue Diffuser (TTL / Manual)], 「-1.5 Blue Diffuser 2 (TTL / Manual)]
[-3 White Diffuser (Manual)]

(*2)TTL operation (TTL slave) is available only for master strobe; [Z-220] / [Z-220F] / [Z-220S]. Optional [TTL Sensor Z] or [Focus Light Controller] is necessary to use the [Z-22] as a slave strobe.
For master strobe Z-240[Type4 / Type3] / D-2000[Type4 / Type3], make sure to use this product to connect to a slave strobe to ensure proper operation. [Optical D Slave Cable Type L] / [Optical D Slave Cable] is NOT usable.
When different strobes are used as a master and a slave, unintentional imbalance may be observed except both strobes are set to Manual mode. [e.g. Imbalance flash output though intending to create "flat lighting" with equal flash output from master / slave strobe etc.]
This is normal because each strobe model has unique specification like [maximum flash power / flash time / flash intensity per unit time] or imbalance caused by operational characteristic of slave flashing in each auto flash mode.
To adjust flash output balance, [flash output adjustment on each strobe], [using appropriate"diffuser"] or [attaching both strobe directly to camera system (without using this product)] may be necessary. Refer to strobe's user manual for recommended connection / setting for dual strobe configuration.